Recycling bin prototype (RIP)
2 weeks, 1 day ago making nablopomo
Back in 2016, having recently moved house and with a new baby, my wife and I realised we needed a way to deal with our recycling. Previously we'd had a neat row of boxes that fitted neatly under a kitchen countertop - one for each category of recycling - but these did not fit well anywhere in the new house, so we were tripping over them in the kitchen.
There were some suitable niches in the new kitchen - beside the washing machine - but searching online quickly showed that nothing entirely suitable was available to order; everything either wouldn't fit, would look terrible, wouldn't hold the relevant materials, wouldn't be easy to simply toss things in, or some combination of all of these. Clearly we needed a custom build.
But did I mention we had a new baby? With no sleep, and what little energy we had devoted to unpacking the hundreds of boxes that somehow still remained, a "proper" solution was out of the question, especially given we were still figuring out the new house and might decide the recycling should go somewhere else entirely. Time for a quick prototype!
I'd recently come across the idea of constructing with corrugated plastic - it's cheap, it's light, it can be cut with a craft knife, and it's at least modestly strong - ideal for a temporary recycling bin. I had some other purposes for it in mind, too, so I ordered a bunch of large plain white sheets.
Having measured the space I set about chopping it to size. It's a little tricky to cut - the corrugations tend to want to throw the knife in one direction or another - but using a metal ruler to guide the blade helped. Soon enough I had side, front, back and base panels. But how to join them?
Since this was to be a temporary prototype, and needed to be quick, I settled on duct tape: a strip of white tape, cut to length, is placed along each join, with half the width of the tape on one panel and half of the other. For strength this is done on both sides of each join - on the inside and the outside - and for neatness (and to protect fingers from the somewhat sharp edges of the plastic) a strip of tape wraps each of the exposed edges, too.
Corrugated plastic and duct tape - sounds horrific, right? Actually the result - when it was new, at least - ended up looking much neater and cleaner than I'd expected. And soon we had a bunch of recycling bins that fitted exactly in the space, were very convenient to chuck things in, and were lightweight and thus easy to empty. And, err, that baby is now ten years old and it's about time we replaced those "temporary" prototypes... especially given that the once-beautiful prototype is now rather bashed and has a hole!
Stay tuned for the exciting story of how the bin got upgraded...
0 comments