MIDI PMODs

electronics fpga midi nablopomo

A circuit board with a PMOD plug, 4x MIDI in ports, and 4x MIDI out ports

For a while I've had in the back of my mind a few MIDI projects, that I've been putting off - in part because doing MIDI well involves very precise control of timing, and that can be tricky (or at least, not much fun) to pull off in software.

But working with FPGAs changes everything!

Getting the timing right - down to the microsecond or better - becomes almost trivial (even if the rest of the programming gets harder, because hardware).

Making an FPGA board speak MIDI - at the physical level (i.e. connectors/voltages/currents) is not hard, but it's also not the interesting part of the puzzle... so fortunately there are solutions you can just buy. I ordered one of these from Midimonster in Germany: a board that connects to a PMOD socket (that lots of FPGA boards have), and then gives you eight MIDI sockets - four inputs and four outputs. That should be plenty for all but the most extravagant of MIDI projects!

0 comments

Post a comment

All comments are moderated, and will not show up immediately on the site, or at all – and if they do, their content may be edited.